DEPARTMENTSIX

Porsche 991 Hood Latch Recall AE04: VIN Check and Repair

Which 2014 to 2015 Porsche 911 cars are in recall AE04, how to check your VIN, what the dealer replaces and what records show the repair was done.

By Department Six Published DIY
Green Porsche 911 (991) coupe, front left view, hood closed
Photo: Xnatedawgx, CC BY-SA 4.0, via Wikimedia Commons

Porsche recall AE04 (NHTSA 14V-698) covers 2014 and 2015 Porsche 911 (991) cars built May 7, 2014 through September 23, 2014. The upper part of the front hood lock may not hold the hood shut. The fix is a free lock replacement at a Porsche dealer. NHTSA acknowledgment letter, December 8, 2014.

Which Porsche 911 cars are covered

NHTSA lists the 2014 to 2015 911, Boxster and Cayman, built May 7, 2014 to September 23, 2014. Porsche's filing names the 911 (991 generation), Boxster (981) and Cayman (981). Porsche Part 573 report, October 31, 2014, section 573.6(c)(2). Porsche's dealer bulletin for AE04 is written for the 911 (991) only. Porsche Technical Information 94/14, AE04.

ItemAE04 / 14V-698
Models911 (991), Boxster (981), Cayman (981)
Model years2014 to 2015
BuiltMay 7, 2014 to September 23, 2014
PartUpper part of the front lid lock
FixReplace the lock upper part, free at a Porsche dealer
ScopeBy VIN range, not by model year alone

Production dates alone are not enough. The Part 573 filing lists specific VIN ranges, and Porsche's bulletin says the campaign is "scope specific to the VIN." Part 573 report, page 2. TI 94/14, Affected Vehicles. A 2014 or 2015 car built outside the dates is not part of the recall.

What the recall addresses

Porsche says the front hood upper lock parts were not made to specification and may fail to latch the hood securely. NHTSA states the risk: the hood could open suddenly while driving, block the view through the windshield and raise the risk of a crash. NHTSA 14V-698, Problem Description and Consequence.

Porsche's bulletin gives the cause. On the affected upper lock parts, the catch bar was not riveted to the mounting plate to specification, and Porsche says the durability of the part cannot be guaranteed over the life of the car. TI 94/14, Information.

Check your VIN and recall status

Run your 17 character VIN on the NHTSA recall lookup or call any Porsche dealer. Dealers check open campaigns in Porsche's PIWIS system. TI 94/14, Attachment B. Porsche customer service is listed as 1-800-767-7243. NHTSA 14V-698, Remedy.

A lookup shows open recalls. A car that already had the repair usually will not show AE04 as open, so the result cannot tell you who did the work or when. Missing recall results on a car in the build range is a reason to ask for the repair record, not proof of a fix.

Prove the repair was done

Ask the seller or a Porsche dealer for the repair order. Porsche's work procedure has 2 steps: replace the upper part of the front lid lock, then enter the recall campaign in the Warranty and Maintenance booklet. TI 94/14, Attachment A. So there are 2 places to look: a dealer invoice and the booklet entry.

The warranty claim uses damage code AE04 099 000 2. If an invoice lists AE04, that code and the part numbers below are what to look for. TI 94/14, Attachment B.

What the dealer repair covers

The dealer replaces the upper lock part and adjusts it. Porsche's published labor time is 28 TU. TI 94/14, Attachment B.

Part numberPartQty
000.043.209.87Lock upper part, front lid1
999.073.378.02Round head screw, M6 x 202

Porsche notes that part numbers in its bulletins are for reference and the dealer should confirm current numbers. The bulletin refers to Workshop Manual job 551819, removing and installing the upper part of the front lid lock, which we could not open, so this article gives no removal steps or torque values. Porsche lists a torque wrench of 6 to 50 Nm (4.5 to 37 ft-lbs) as the tool. TI 94/14, Tools and Parts Info.

When records are missing or disagree

  • VIN lookup shows AE04 open: book it with a Porsche dealer. The repair is free.
  • VIN lookup shows nothing, but the car is in the build range: ask a dealer to check the VIN in PIWIS and the service booklet for an AE04 entry.
  • Seller says it was done, with no invoice: ask for the dealer to confirm in PIWIS. We found no Porsche document that says what proof is enough, so that is the dealer's call.
  • Booklet and dealer records disagree: trust the dealer's VIN check and ask for a printed repair history.

We found no later Porsche document that replaces the November 11, 2014 bulletin. The recall also applies to cars in the VIN ranges only, so a lookup with no result on a car outside the ranges is expected.

Before you inspect it yourself

Porsche publishes no owner inspection steps for AE04, and the fix is a dealer repair. Until it is done, treat the hood as a safety item. Check these:

  • Your VIN against the NHTSA lookup.
  • Your car's build date against May 7 to September 23, 2014.
  • Any repair order that shows AE04.
  • The hood latches firmly when closed. If it does not, do not drive the car and call a dealer.

For other 911 service data, see our 997.1 buyer's guide.

Add Department Six as a preferred source on Google